Heat Mat Underfloor Heating

Call 01444 247020 to speak to an advisor or find your nearest stockist

  • Home
  • About Us
  • Sustainable Living
  • Product Range
  • Help & Support
  • Contact Us

Earthed Heating Systems

You are here: Home » Heat Mat FAQs » Heat Mat Glossary » Earthed Heating Systems

Earthed heating systems come in three forms, 100% earth shielded products, earthed products and products with a separate earthing shield or grid.

A 100% earth shielded product is created when the live wires carrying the mains current are completely surrounded by an earthing braid or aluminium sheet, and these products are suitable to be installed in bathrooms and similar areas without the requirement for any extra protection.

All Heat Mat’s underfloor heating systems are 100% earth shielded for complete peace of mind and safety.

Earthed products simply have an earth wire running alongside the wires carrying the electricity and these products have to have additionally earthing grids or protection installed above them if they are used in wet areas such as bathrooms.

Products with a separate earth shield usually come in the form of Teflon coated wires beneath an aluminium sheet that can be connected to the earth in your property. These systems are suitable for use beneath some floating floors however if they are a cut and turn system a large amount of care must be taken when installing them that the electrical connections between each separate section of the earthing sheet are made correctly. Heat Mat recommend if installing this type of system that a qualified electrician is present to check these connections are made correctly as there is no way to check them once the floor covering is installed.

  • Help And Support
    • Heat Mat FAQs
    • Instruction Downloads
    • Heat Mat Glossary
  • Privacy Policy
  • Terms & Conditions
  • Tel: 01444 247020
  • Email: sales@heatmat.co.uk
  • Heatmat Lifetime Warranty
  • Trading Standards Buy with Confidence Mark
  • 17th Edition Compliant
  • EMC Safe
  • Met EU consumer safety, health or environmental requirements
  • strategic & technical energy consultancy
  • BEAB approved
  • BEAB approved factory
  • Further BEAB approval
  • Semco
  • The Title Association

© Copyright Heat Mat Ltd 2010 Registered office: Ashwyn Business Centre, Marchants Way, Burgess Hill, West Sussex, RH15 8QY

Registered in England. Company registration number: 4905464 VAT no: GB 855 7131 15 Design by GSB Associates.