Heating Mats

Simple and trouble free to install...

Our heating mats are simple and trouble free to install. They are particularly suited to large areas where their installation will be quicker than a loose 3mm cable system.

A large range of sizes...

They are supplied in outputs of 150W or 200W per square metre and come in a large range of sizes allowing you to select the perfect system whatever your room dimensions. In normal circumstances they do not add any build height to your tiled floor as they are so thin that they are contained within the tile adhesive layer.

Pre-spaced and fixed heating cable...

At only half a metre wide and constructed from a fibreglass mesh, the mats have our 3mm thin heating cable pre-spaced and fixed beneath the mesh to help protect the cable during installation. The heating cable is twin-conductor and earth shielded so that, unlike many other suppliers' products, it emits negligible EMF radiation.

100% floor coverage...

Unlike heating ribbons and carbon panels, 100% coverage of the free floor area can be achieved as the mat can be cut and turned and the cable can be stripped off to fill in any awkward areas.

Suitable for tile and stone floors...

200W/m² mats offer a rapid warm up time and are suitable for use beneath tile and stone coverings where they can provide primary heating in the vast majority of rooms including conservatories. When the 200W/m² heating mats are laid onto a wooden base a 2-3mm skim of tile adhesive should be used to cover the base first.

Suitable for carpet, wooden floors and vinyl...

150W/m² mats are suitable to provide floor warming beneath the same floor coverings and in addition can be used beneath carpet, bonded wooden floors and vinyl when used with Thermoplan levelling compound. In well insulated rooms they can provide primary heating.

Benefiting you and the environment...

Both systems are suitable for use with Marmox Thermal Tilebacker Boards which will enable them to run more efficiently, benefiting you and the environment.