200W Heating Mat factsheet

Details of Heat Mat 200W Heating Mat product

Download

Cut and Turn System
Litzer Wire Technology
Kevlar Anti-stretch
Anti-crush Cable Jacket
Fluropolymer Protection
100% Shielded Coldtail
100% Earth Shielded
Zero Float Mesh
Lifetime Warranty
18th Edition Compliant
UKCA Marked
BEAB Approval

200W Heating Mats

200W heating mats have a high output and are ideal for use under tile or stone.

Category: 200W Heating Mats
Category: Tags: , ,

Our 200W/m electric underfloor heating mats are high-quality, trusted by installers and homeowners nationwide and easy to fit.

Our 200W heating mats are easy-to-install and designed to provide energy-efficient tile warming, or a full heating system, in all types of room. This award winning underfloor heating mat range reacts significantly faster than less powerful systems, and the ultra-thin cable on mesh construction ensures floor levels are only raised by a few millimetres.

200W mats are designed for use under tile or stone and cannot be laid directly onto wood or other floor coverings unless the floor base is skimmed with 2-3mm of flexible tile adhesive/levelling compound or thermal underfloor insulation boards are laid first.

200W heating mats are remarkably simple to operate using a Heat Mat or electric underfloor heating thermostat and provide luxurious warm tile, or natural stone, floors.

  • Designed to provide sole source heating, even in conservatories and other high heat loss rooms
  • When used with an intelligent thermostat timer, 200W systems cost less to run than lower powered alternatives
  • Technologically advanced wire design and a robust high-powered heating cable
  • Particularly suitable for large areas, where loose heating cables could take three times as long to fit

 

Heat Mat Advanced Cable Design

What are the benefits of installing 200W/m² underfloor heating mats?

  • Easy-to-install, simple cut and turn design
  • Add minimal build height
  • Heat up quickly
  • Available in a wide range of sizes
  • Part L and 18th Edition compliant
  • Designed and made in Denmark
  • Covered by our lifetime warranty

Underfloor heating mat systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards. 

Sub-floor surfaces and insulation board

For the most energy efficient system and the fastest warm up time we recommend laying 200W heating mats onto Heat Mat thermal insulation board. Mats can also be laid onto pre-primed concrete, tile or stone surfaces or suitably secured ply board skimmed with 2mm of tile adhesive.

Bespoke heating mats

Bespoke units can be manufactured to order for hotel or Pod projects, with alternative coverage’s, widths, Wattage outputs and cable thicknesses available.

Energy efficient solution

200W heating mats are almost 100% efficient at converting electricity into heat and they can easily be powered by locally generated electricity from either photo voltaic or wind power sources. When used with Heat Mat’s NGTouch thermostat they form a Part L compliant system, and they are also suitable for integration into a home/building automation system. Our NGTouch thermostat has energy saving features and displays usage in £'s and pence helping to ensure your system runs efficiently.

Approved and guaranteed

We manufacture our high-quality heating mats and cables in Denmark and Germany. Our electric underfloor heating mats are supplied with a Lifetime Warranty and independently BEAB approved. They are also certified by Semko as having a very low EMC radiation, which is a result of their twin conductor design.

Innovative heating cable technology

Over the last three decades Heat Mat have worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies:

  • Litzer Wire Technology – multiple heating elements are spun together to provide superior strength in a very flexible heating wire
  • 200°C Fluoropolymer Protection – super-high temperature fluoropolymer insulation surrounds the heating elements and provides superior protection against overheating and physical damage
  • Kevlar Anti-stretch Cable – Kevlar strands run through the centre of the heating cable preventing it from being stretched and damaged during installation
  • 100% Earth Shield – an aluminium safety shield wraps the entire heating cable to ensure the system is instantly shut down if damaged. The shield also enables the cables to hold their shape when being installed
  • Anti-crush Cable Jacket – the high quality PVC cable jacket provides unrivalled protection against crushing and cutting damage during installation
  • 100% Shielded Coldtail – the entire coldtail is shielded continuing the 100% electrical protection seen on our heating cable
  • Cut & Turn Mat System – the cut-and-turn systems allows mats to be turned back on themselves multiple times during fitting, meaning less mats are required ensuring a far smoother installation
  • Zero-float Mesh – the mesh terminates at the last row of tape rather than continuing to the ends of the cable, so none floats up when covered in levelling compound or screed

Technical Data for 200W mats

  • General Construction: Dual conductor wire with earth
  • Supply Voltage: 240V
  • Power Output: 200W/sqm
  • Output Range for 200W mats: 130W–2590W
  • Maximum Load: 20W/m
  • Standard Range: 0.6m²–12.9m²
  • Mat Dimensions: 0.5m wide x 1.2m to 25.8m
  • Maximum Cable Temperature: 90°C
  • Approvals: CE Marked and BEAB system approved
  • Wire Thickness: 2.7mm to 3.2mm depending on Ohm Value
  • Cable Flexibility: Minimum allowable cable radius is 18mm
  • Power Range: 130W–2590W
  • Approved in accordance with: EN 60335-1:1998, EN60335-2-17:1999, IEC 60730
  • IP Rating: IPX7

Construction

  • Thermal Conductor: 2 x resistance wire insulated with fluoropolymer (FEP 7Y) tested to 200°C
  • Outer Insulation: PVC (Y) tested to 90°C
  • Coldtail Lead: 4m double insulated cable
  • Earth Protection: 100% aluminium earth shield
  • Reinforcement Materials: Fibreglass wire
  • Reinforcement Mesh: Fibreglass mesh
  • Fixing Material: Three strips of double sided tape
  • Reinforcement Mesh: Fibreglass mesh

200W/m² Product codes and sizes

Product Code Area
(m²)		 Length
(m)		 Width
(m)		 Watts
(W)		 Ohms
()		 TSI GTIN
PKM-200-0060 0.6 1.2 0.5 130 442 390631202 5060424142491
PKM-200-0100 1.0 2.0 0.5 208 277 389519047 5060424142507
PKM-200-0160 1.6 3.2 0.5 310 186 389519076 5060424142514
PKM-200-0200 2.0 4.0 0.5 405 142 389519089 5060424142521
PKM-200-0260 2.6 5.2 0.5 512 113 389519144 5060424142538
PKM-200-0280 2.8 5.6 0.5 576 100 389519160 5060424142545
PKM-200-0350 3.5 7.0 0.5 719 80 389519173 5060424142552
PKM-200-0410 4.1 8.2 0.5 820 67 436272318 5707359513087
PKM-200-0550 5.5 11.0 0.5 1100 53 436272321 5707359513094
PKM-200-0600 6.0 12.0 0.5 1196 48 389519212 5060424142583
PKM-200-0680 6.8 13.6 0.5 1360 43 436272334 5707359513100
PKM-200-0730 7.3 15.0 0.5 1660 38 436272347 5707359513117
PKM-200-0870 8.7 17.8 0.5 1740 33 436272350 5707359513124
PKM-200-1020 10.2 19.8 0.5 2040 27 436272363 5707359513131
PKM-200-1290* 12.9 25.8 0.5 2590 22 436272376 5707359513148

*These mats are not currently BEAB approved, but are manufactured to the same standards.