Image of 150W Sticky Mat
Cut and Turn System
Anti-crush Cable Jacket
100% Shielded Coldtail
100% Earth Shielded
Zero Float Mesh
Lifetime Warranty
18th Edition Compliant
UKCA Marked
 

150W Sticky Mats

150W sticky heating mats combine an ultra-thin heating cable with self-adhesive mesh for straightforward installation and minimal floor build-up.

Category: 150W Sticky Mats
Category:

Sticky Mats provide a slim, easy-to-install electric underfloor heating solution for new floors and renovation projects.

Sticky Mats combine an ultra-thin heating cable, approximately 3.2mm in diameter, with self-adhesive fibreglass mesh. The low-profile design keeps floor build-up to a minimum, making them ideal where available floor height is limited.

The pre-spaced heating cable ensures an even layout, while the adhesive mesh holds the mat in place during installation. A twin-conductor design with a single 3m cold lead simplifies connection.

Sticky Mats can provide comfortable warm floors or serve as the main heating system where the selected output meets the room’s heat loss. They can be installed within tile adhesive or levelling compound, with the floor build-up selected to suit the final floor covering.

What are the benefits of installing Sticky Mats?

  • Ultra-thin heating cable for minimal floor build-up
  • Self-adhesive mesh for straightforward installation
  • Pre-spaced cable for a consistent heating layout
  • Suitable for new floors and refurbishment projects
  • Single cold lead for simplified connection
  • Fully earth-screened heating cable
  • Suitable for comfort heating or main room heating, subject to heat loss

Combine Sticky Mats with an intelligent Wi-Fi thermostat for convenient control and thermal insulation boards to reduce downward heat loss and improve warm-up times.

Simple and speedy installation

Sticky Mats feature self-adhesive fibreglass mesh that holds the heating cable in place during installation. The cable is already evenly spaced, reducing preparation time and removing the need to measure individual cable runs. A single 3m cold lead provides a convenient connection point.

Flexible floor finishing options

Sticky Mats can be embedded within tile adhesive or levelling compound. Tiles and stone are ideal finishes, while other floor coverings require a suitable covering layer and compliance with the flooring manufacturer’s underfloor heating requirements.

Controlled comfort

Pair Sticky Mats with a compatible programmable thermostat and floor sensor to manage heating times and floor temperatures. Installing thermal insulation boards beneath the system helps reduce downward heat loss and improve warm-up times.

Slim heating cable construction

Sticky Mats combine a compact heating cable with practical installation features:

  • Approximately 3.2mm cable diameter – keeps the heating element slim where floor height is limited.
  • Twin-conductor design – provides a single cold lead connection.
  • Full earth screening – aluminium tape and a copper drain wire provide earth protection.
  • PVC outer jacket – forms the protective outer covering of the cable.
  • Self-adhesive fibreglass mesh – maintains cable spacing and helps secure the mat during installation.

Technical Data for Sticky Mats

  • General Construction: Twin-conductor heating cable with earth screen
  • Supply Voltage: 230V AC
  • Power Output: 150W/m²
  • Total Output Range: 150W–2250W
  • Standard Coverage Range: 1.0m²–15.0m²
  • Mat Dimensions: 0.5m wide, with lengths from 2m to 30m
  • Heating Cable Diameter: Approximately 3.2mm
  • Coldtail Length: 3m
  • Maximum Operating Temperature: +80°C
  • Minimum Operating Temperature: -15°C
  • Minimum Installation Temperature: +5°C
  • Minimum Storage Temperature: -30°C
  • IP Rating: IPX7
  • Compliance: RoHS

Construction

  • Heating Element: Twin-conductor series resistance cable
  • Outer Jacket: PVC
  • Earth Protection: Aluminium tape providing 100% coverage, with a copper drain wire
  • Supporting Mesh: Self-adhesive fibreglass
  • Cable Fixing: Heating cable secured to the mesh with adhesive tape
  • Cable Colour: Green
  • Mesh Colour: Grey

150W/m² Sticky Mats – Product Codes and Sizes

Product Code Area
(m²)		 Length
(m)		 Width
(m)		 Watts
(W)		 Resistance
(ohms)
SMT-150-0100 1.0 2 0.5 150 352.7
SMT-150-0150 1.5 3 0.5 225 235.1
SMT-150-0200 2.0 4 0.5 300 176.3
SMT-150-0250 2.5 5 0.5 375 141.1
SMT-150-0300 3.0 6 0.5 450 117.6
SMT-150-0350 3.5 7 0.5 525 100.7
SMT-150-0400 4.0 8 0.5 600 88.2
SMT-150-0450 4.5 9 0.5 675 78.4
SMT-150-0500 5.0 10 0.5 750 70.5
SMT-150-0600 6.0 12 0.5 900 58.8
SMT-150-0700 7.0 14 0.5 1050 50.4
SMT-150-0800 8.0 16 0.5 1200 44.1
SMT-150-0900 9.0 18 0.5 1350 39.2
SMT-150-1000 10.0 20 0.5 1500 35.3
SMT-150-1200 12.0 24 0.5 1800 29.4
SMT-150-1500 15.0 30 0.5 2250 23.5