Heat Mat’s new Underlaminate System is selected for the exclusive Coln Park Development

Request a callback

PKM-240

240W/m² mats are the highest output and fastest heating system we offer
Powerful enough to heat even the highest heat loss rooms
Fastest heat up time of any mat on the market
Covered by our lifetime warranty

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

Heat Mat Advanced Cable Design

Underfloor heating mat systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

PKM-200

Powerful enough to heat high heat loss rooms like conservatories
Fast heating up times
Faster reacting than an in-screed system of the same power
Covered by our lifetime warranty

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

Heat Mat Advanced Cable Design

Underfloor heating mat systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

PKM-160

Electric Under Floor Heating - 160W Heating Mats

Powerful enough to heat moderately well insulated rooms
Faster reacting than an in-screed system of the same power
Very low build height
Covered by our lifetime warranty

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

Heat Mat Advanced Cable Design

Underfloor heating mat systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

In-screed Cable

In Screed Electric Underfloor Heating Cable

Perfect for new screed floors
Ideal for large areas e.g. warehouses and sports halls
Install time drops dramatically in rooms over 100m²
Best installed directly onto foil-faced insulation
Simple and cost effective to install
3-Phase systems and bespoke sizes available
Covered by our extended warranty

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

Underfloor heating systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

Mats & Latex

Powerful enough to heat moderately well insulated rooms
Used with 12mm of levelling compound suitable for almost all floor finishes
Faster reacting than an in-screed system of the same power
12mm build height
Covered by our lifetime warranty

Electric Underfloor Heating Flexible Self Levelling Compound

Heat Mat Fibre Reinforced Flexible Self-levelling Compound

Download

Innovative heating cable technology

Over the last three decades Heat Mat have worked to continuously improved the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

Heat Mat Advanced Cable Design

Underfloor heating mat systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

PKC-3.0 Cable

Under Tile Bathroom Heating Cable

Flexible install – ideal for small or complicated rooms
Alter the heat output by adjusting the space between the cables
Ultra-thin cable for low build height
Perfect for use with decoupling membrane
Covered by our lifetime warranty

Electric Under Floor Heating Cable

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

Heat Mat Advanced Cable Design

Underfloor heating systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

PKM-110

Electric Under Floor Heating - 110W Heating Mats

Best suited to energy-efficient properties
Lowest power supply requirement per square metre
Very low build height
Covered by our lifetime warranty

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

Heat Mat Advanced Cable Design

Underfloor heating mat systems react faster and are more energy efficient when used with an intelligent thermostat timer and are laid onto thermal insulation boards.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

Overlay Boards

Beneath Carpet or Vinyl Overlay Board for Combymat

Enables carpet, vinyl, linoleum and bonded board floors to be laid onto underfloor heating without any wet trade
Dry and dust free installation
Creates a very stable, floating sub-floor
Very simple to install
Heating system and overlay boards can be installed in a single day as no wet trade used
Supplied in 2.88m² packs
Increases build height by only 7mm
Covered by our lifetime warranty

Under Laminate Electric Under Floor Heating Mat

Heat Mat Combymat System Factsheet

Download

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

150W/m² Foil Mat

Under Laminate Electric Under Floor Heating Mat

Ideal for use beneath floating laminate and engineered floors
Very cost effective system
Low build height, and 6mm insulation supplied as part of system
Easy and fast to install
No need for levelling compound or other wet trade
Covered by our lifetime warranty

Under Laminate Electric Under Floor Heating Mat

Heat Mat Combymat System Factsheet

Download

Innovative heating cable technology

Over the last three decades Heat Mat has worked to continuously improve the design of their cables and mats to ensure their safety and longevity. This unique combination of technologies means you get a safe and fast to install system without sacrificing quality. Only Heat Mat’s systems include this combination of technologies.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

EXPLORE TECHNICAL INFO

Concrete Floors

TEST For polished and painted concrete floors of at least 55mm thickness we recommend using our in-screed heating cables by embedding them directly into the concrete. This is a low cost option and adds nothing to the build height whilst providing a very stable temperature.

If the concrete layer is thinner than 55mm and suitable for use with underfloor heating then standard heating mats can be used and covered with the concrete. If it is not suitable to have underfloor heating encased within it, we recommend using our standard heating mats, covered with 12mm of levelling compound and then installing the concrete floor on top of the levelling compound.

Please note that in all cases undertile heating cable can be used instead of heating mats and thermal underfloor insulation installed beneath the heating system will speed up its warm up time and reduce running costs.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

Laminate Wood

With laminate floors it is vital to spread the heat evenly beneath the flooring to avoid discolouration or movement in the floor. For residential properties we recommend installing our 6mm Decora insulation layer onto the floor to prevent downward heat loss and then installing our Underlaminate System heating mats on top. These mats have an output of 150W/sqm and due to their dual-conductor design are fast to install. They are fully earthed for safety unlike a carbon film heating system.

The benefits of this system are a rapid reaction time, a low build height and no ‘wet trade’ (such as levelling compounds) is required during the installation. For very high traffic areas and commercial premises, we would recommend installing a heating system beneath a levelling compound or screed (as with vinyl and Karndean flooring) – better suited to heavy traffic. It is important not to trap the heat beneath the laminate so any layer of acoustic insulation placed above the heating system must be able to cope with the heat produced by the mats and also let the heat transfer through to the laminate floor.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

Engineered Wood

Bonded wooden and engineered board floors can be laid onto floor bases that have been prepared in the same way as for vinyl and Karndean flooring Always check the wood or engineered board you choose is suitable for use with underfloor heating. If battens are being used to bond them to the floor surface of screed or levelling compound first attach the flooring above. Please note – the higher the battens, the longer it will take for heat to rise through the boards due to heating the air in the gap beneath the floor first.

An alternative method of installation (between battens that are at least 500mm apart) is laying a heating mat between the battens, covering this with 12mm of levelling compound, and then fixing the flooring to the battens above. In all cases, the maximum output of the heating system is 160W/m².

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

Tile or Stone

Beneath tile and stone floors we recommend installing our standard heating mat or heating cable. If the floor base is concrete the system can be laid directly onto the floor and skimmed with tile adhesive or covered with a latex screed. The tiles or stone can then be laid directly on top. This method ensures the heating system will have a fast heating up time and maintains a low build height.

For the fastest possible heating up time you should install our 240W/sqm heating mats and use thermal underfloor heating insulation boards beneath the heating system.

If you are laying a screed you can use an in-screed heating cable with a maximum output of 240W/sqm, which provides a very stable temperature and is the most cost-effective option.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

Vinyl & Karndean

There are two options for safely heating vinyl or Karndean floors and these both involve covering the heating element with screed or levelling compound to help spread the heat evenly across the floor.

If you are laying a screed then you can use an in-screed heating cable with a maximum output of 160W/sqm, which provides a very stable temperature, and is the most cost effective method of installing underfloor heating.

If you are not laying a screed then we recommend laying our 160W/sqm heating mats and covering these with at least 12mm of flexible self-levelling compound to help spread the heat. This installation method ensures a low build height and provides a fast-reacting system.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

Carpeted Floors

There are two options for safely heating carpeted floors, one is with a 12mm layer of levelling compound over a 160W/m² heating mat and the other option is our combymat system combined with overlay boards (see picture).

Be aware that the underlay should have a Tog rating no higher than 0.8 Tog, and combined with the carpet no higher than 1.8 Tog. Most hessian-backed carpets have a Tog rating below this. Thermal underfloor insulation boards installed beneath the heating system will increase the heating up time and reduce running costs. Our combymat system must be used with our 6mm Decora insulation layer.

If you have any questions or are considering another type of flooring please call our technical department to discuss options on 01444 247020 or contact us here.

Cut & Turn System

Cut-and-turn systems allow mats to be turned back on themselves multiple times during fitting, meaning less mats are required ensuring a far smoother installation

UKCA Compliant Mark

The UKCA mark confirms that a product complies with the UK’s regulations and is fit for sale in the UK – it is the UK equivalent of the European CE mark. In the future all electrical products sold in the UK will need to be UKCA marked.

BEAB Component Approval

The BEAB Approval Mark, an electrical safety mark, demonstrates that the UK’s leading, independent approvals specialists have evaluated a product to the highest European and International standards to confirm its compliance and safety. All Heat Mat’s 3mm heating mats and cables are independently BEAB Approved.

18th Edition Compliance

The 18th Edition Compliant Mark confirms that the marked product conforms to the IEE 18th Edition Wiring Regulation. All Heat Mat electrical products are covered by this mark.

Lifetime Warranty

We know that when choosing an underfloor heating system you need to be confident that you are getting high quality products which are guaranteed to last for a long time. The design of our products is based on more than twenty years’ experience of the UK underfloor heating market and with this knowledge we manufacture products that are robust, safe to use and offer great value for money. In fact, the heating mats and cables should continue to operate without problems until you replace your floor, and our Lifetime Warranty covers the heaters in the floor even if you rent out or sell the property.

Zero-float Mesh

The mesh terminates at the last row of tape rather than continuing to the ends of the cable, so none floats up when covered in levelling compound or screed

100% Earth Shielded

An aluminium safety shield wraps the entire heating cable to ensure the system is instantly shut down if damaged. The shield also enables the cables to hold their shape when being installed

100% Shielded Coldtail

The entire coldtail is shielded continuing the 100% electrical protection seen on our heating cable

200°C Fluropolymer Protection

Super-high temperature fluoropolymer insulation surrounds the heating elements and provides superior protection against overheating and physical damage

Anti-crush Cable Jacket

The high quality PVC cable jacket provides unrivalled protection against crushing and cutting damage during installation

Kevlar Anti-stretch Cable

Kevlar strands run through the centre of the heating cable preventing it from being stretched and damaged during installation

Litzer Wire Technology

Multiple heating elements are spun together to provide superior strength in a very flexible heating wire

UKCA Compliant Mark

The UKCA mark confirms that a product complies with the UK’s regulations and is fit for sale in the UK – it is the UK equivalent of the European CE mark. In the future all electrical products sold in the UK will need to be UKCA marked.

Cut & Turn System

Cut-and-turn systems allow mats to be turned back on themselves multiple times during fitting, meaning less mats are required ensuring a far smoother installation

Litzer Wire Technology

Multiple heating elements are spun together to provide superior strength in a very flexible heating wire

Kevlar Anti-stretch Cable

Kevlar strands run through the centre of the heating cable preventing it from being stretched and damaged during installation

Anti-crush Cable Jacket

The high quality PVC cable jacket provides unrivalled protection against crushing and cutting damage during installation

200°C Fluropolymer Protection

Super-high temperature fluoropolymer insulation surrounds the heating elements and provides superior protection against overheating and physical damage

100% Shielded Coldtail

The entire coldtail is shielded continuing the 100% electrical protection seen on our heating cable

100% Earth Shielded

An aluminium safety shield wraps the entire heating cable to ensure the system is instantly shut down if damaged. The shield also enables the cables to hold their shape when being installed

Zero-float Mesh

The mesh terminates at the last row of tape rather than continuing to the ends of the cable, so none floats up when covered in levelling compound or screed

Lifetime Warranty

We know that when choosing an underfloor heating system you need to be confident that you are getting high quality products which are guaranteed to last for a long time. The design of our products is based on more than twenty years’ experience of the UK underfloor heating market and with this knowledge we manufacture products that are robust, safe to use and offer great value for money. In fact, the heating mats and cables should continue to operate without problems until you replace your floor, and our Lifetime Warranty covers the heaters in the floor even if you rent out or sell the property.

18th Edition Compliance

The 18th Edition Compliant Mark confirms that the marked product conforms to the IEE 18th Edition Wiring Regulation. All Heat Mat electrical products are covered by this mark.

BEAB Component Approval

The BEAB Approval Mark, an electrical safety mark, demonstrates that the UK’s leading, independent approvals specialists have evaluated a product to the highest European and International standards to confirm its compliance and safety. All Heat Mat’s 3mm heating mats and cables are independently BEAB Approved.

Request a quote

Title
First name*
Last name*
Your phone number*
Your email address*
Postcode*
Project timeframe
Business type
Business name
Room details
Room 1 type*
Room 1 Primary or Secondary Heating*
Room 1 floor size (in m²)*
Room 2 type
Room 2 Primary or Secondary Heating
Room 2 floor size (in m²)
Room 3 type
Room 3 Primary or Secondary Heating
Room 3 floor size (in m²)
Which products do you require?*
Is screed being laid?*
If known, please tell us your chosen Heat Mat distributor(s)
Name and email address of chosen distributor
* Required Fields
Please provide further information so we can calculate the best possible system for the best price:

If known, what is the subfloor type e.g. Floorboards or Concrete?
If known, what is the final floor covering e.g. Carpet, Wood, Laminate
*

Heat Mat Messenger

Open Heat Mat Messenger

Heat Mat's new Underlaminate System is selected for the exclusive Coln Park Development